Frequent Questions

  • [FAQ] What are some new & exciting parts that TI offers?

    Other Parts Discussed in Thread: TLV320ADC5120 , TLV320ADC6120 , PCM1863 , PCM1862 , PCM1804 , PCM1822 , PCM1820 , PCM6020-Q1 , PCM1808-Q1 , PCM3120-Q1 , PCM1863-Q1 , PCM1862-Q1 , PCM5100A , PCM1754 , PCM5102A , PCM5101A , PCM1789 , PCM1754-Q1 , PCM5100A…

  • [FAQ] AM62P: How to Fix Missing TIFSSTUB to enable Low Power Modes in Linux SDK 10.0/10.1?

    Part Number: AM62P Tool/software: I've successfully tested low power modes on AM62P using the default images. But I've tried to build my own U-Boot images, but now low power modes are not working. What is the cause and solution to this?

  • [FAQ] AM62L ( AM62L32 , AM62L31 ) Why is MMC1 powered by two different voltage supplies, VDDSHV1 and VDDSHV3 ?

    Part Number: AM62L Tool/software: Hi TI Experts, Could you confirm that the voltage domains are correct for the MMC1_SDCD and MMC1_SDWP pins? The datasheet shows both MMC0 and MMC2 as having all member pins bellowing to the same voltage domain.…

  • [FAQ] TDA4VM: How to address the gPTP Sync failure post reset recovery of CPSW in Ethenret Firmware?

    Part Number: TDA4VM Tool/software: After a CPSW reset recovery from ETHFW, gPTP fails to re-establish synchronization, impacting time-sensitive applications.

  • [FAQ] SK-AM64B: Building and Booting an UBIFS-based Linux rootfs from OSPI NOR Flash using TI Processor SDK Linux v11.x Yocto Sources

    Part Number: SK-AM64B Other Parts Discussed in Thread: SK-AM62B Tool/software: Overview The TI SK-AM64B EVM has an on-board 64MB-sized OSPI Flash chip that can be used to boot the AM64x device from. The documentation associated with SDK v11.0 contains…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62L / AM64x / AM62Ax / AM62Px / AM62D-Q1 - .alg (ASCII) file for use with Altium tool

    Part Number: AM62P Other Parts Discussed in Thread: TMDS64EVM , SK-AM64B , SK-AM62B-P1 , SK-AM62-LP , SK-AM62B , SK-AM62-SIP , SK-AM62A-LP , , AM62L , SK-TDA4VM Tool/software: Hi Board Designers, Refer below query related to availability of ASCII…

  • [FAQ] AM263P4: Text and Data placement using sysconfig tool.

    Part Number: AM263P4 Other Parts Discussed in Thread: SYSCONFIG Tool/software: Sometimes it might be required to add certain text and data objects in particular sections of memory. Memory configurator in sysconfig enables the user to place desired…

  • [FAQ] AM62L: MSPM0 – ADC Attach on AM62L using SPI

    Part Number: AM62L Other Parts Discussed in Thread: MSPM0L1306 , SYSCONFIG , LP-MSPM0C1104 , MSPM0C1104 Tool/software: Hardware Setup: For AM62L EVM: Connect type-C power supply. Connect UART-to-USB and USB for JTAG XDS110 to your computer.…

  • [FAQ] Do I connect NC pin to GND, VCC, or leave it floating?

    Do I connect NC pin to GND, VCC, or leave it floating?

  • [FAQ] What is best TI opto-emulator (ISOM8xxx) for my optocoupler application?

    Part Number: ISOM8110 Tool/software: FAQ: Isolation >> Opto-Emulators >> Current FAQ Does TI have similar isolator to my optocoupler? Yes! TI’s current driven isolators - the ISOM8 xxx family - will cross with the most popular opto-isolators!

View FAQ threads
Recommended For You