Frequent Questions

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62Ax / AM62Px / AM62D-Q1 / AM62L / AM64x / AM243x Design Recommendations / Custom board hardware design - Queries related to IBIS model

    Part Number: AM625 Other Parts Discussed in Thread: AM6442 , DS160PR810 , AM67 Tool/software: Hi TI Experts, Do you have recommendations on using the IBIS model?

  • [FAQ] AM62x & AM64x: How to enable PRU RPMsg on Processor SDK Linux 11.0

    Part Number: PROCESSOR-SDK-AM62X In Linux kernel 6.12, we remove the separate PRU RPMsg (RPMessage) driver, and use the generic RPMsg driver instead. However, the changes were not complete in time for Linux SDK 11.0. This means that PRU RPMsg does not…

  • [FAQ] PROCESSOR-SDK: Getting Started with GPIOs in Linux using the AM62 and AM64 Family Processors

    Part Number: PROCESSOR-SDK-AM62X Other Parts Discussed in Thread: AM62P , AM62L , SK-AM64B , SK-AM62B-P1 , SK-AM62-LP , SK-AM62A-LP , SK-AM62P-LP , TMDS62LEVM , AUDIO-AM62D-EVM , SYSCONFIG Tool/software: The objective of this FAQ is for someone with…

  • [FAQ] TDA4VM: How to enable MCU R5F cores running in split mode in SPL boot flow.

    Part Number: TDA4VM Tool/software: TI SDKs by default configures MCU R5F running in lock step mode, how to configure to run MCU R5F in Split Mode.

  • [FAQ] AM2612: Device 'Cortex R.AM261x' is not currently recognized: CCS is not detecting AM261x

    Part Number: AM2612 Tool/software: Hi TI experts, I am using CCS v12.8.1, MCU_PLUS_SDK for AM261x. If I try to import any example from AM261x MCU+ SDK, I get the following error: Even if I try to create a new Project from scratch, it says " Device…

  • [FAQ] MCU-PLUS-SDK-AM261X: All ADC2 outputs are '0' on AM261x devices

    Part Number: MCU-PLUS-SDK-AM261X Other Parts Discussed in Thread: LP-AM261 , SYSCONFIG Tool/software: Hi TI experts, All ADC2 values output as '0' on AM261x. Example output on is adc_multiple_soc_epwm_am261x-lp_r5fss0-0_nortos_ti-arm-clang and on…

  • [FAQ] AM2612: USB: DFU and SBL DFU application not working

    Part Number: AM2612 Tool/software: Hi TI experts, I am using the AM261x-LP board and running into the following USB issues: I tried running the SBL DFU application via the dfu-util tool provided. I am not able to get the device to enumerate after…

  • [FAQ] UCC27714: What are the design considerations for split ground half-bridge gate driver in high voltage applications?

    Part Number: UCC27714 Tool/software: There are numerous 600V half-bridge gate drivers available in 8 pin SOIC packages and also higher pin count 14 pin packages. With the 8 pin SOIC package, only the basic half-bridge gate driver functions are available…

  • [FAQ] TDA4VH-Q1: How do I control the quality of service (QoS) and class of service (CoS) settings on TDA4 devices to balance transaction loads and priorities?

    Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VH , J784S4XEVM Tool/software: I'm seeing issues with the display experiencing sync losts when running the TIDL AVP demo. How do I balance the transaction loads and priorities so that the DSS…

  • [FAQ] AM62x, AM62Px, AM62D-Q1, AM64x, AM243x: 4KB Sector Erase Fails

    Part Number: PROCESSOR-SDK-AM62X Tool/software: Greetings, When working with a flash part like S25HL512T or S28HS512T , one will come across Uniform vs Hybrid mode. The points which this FAQ covers is: What is Uniform vs Hybrid Mode for the…

View FAQ threads
Recommended For You