Frequent Questions

  • [FAQ] AM62X: How to Allocate & Use GPIOs from Different Device Domains

    Part Number: PROCESSOR-SDK-AM62X Other Parts Discussed in Thread: SK-AM62B-P1 , SYSCONFIG Tool/software: I want to use MCU GPIO from A53/Linux or Main Domain GPIO from M4/MCU. How can I allocate these GPIOs and use them?

  • [FAQ] AM2432: Loop back clock for RGMII and MII

    Part Number: AM2432 Tool/software: Hi, Customer is asking the following question. When configured to operate as the " MII " Clock source, the signal does NOT needed to be routed back to the RMII_REF_CLK pin ? Customer is refering Datasheet…

  • [FAQ] What is Stuck Bus Recovery?

    Other Parts Discussed in Thread: TCA4307 FAQ: Logic and Voltage Translation > IxC >> What is Stuck Bus Recovery? Stuck Bus Recovery is a mechanism built into an I2C device that automatically attempts to free the SDA bus during a stuck LOW condition…

  • [FAQ] WINCESDK-AM1XOMAPL1X: Windows CE6 / WinCE BSP Resources

    Part Number: WINCESDK-AM1XOMAPL1X Other Parts Discussed in Thread: DM3730 Tool/software: This is a general FAQ page for questions about WinCE6 on TI devices. TI does not currently offer Windows CE6 support. By that we mean, if you have any questions…

  • [FAQ] BQ25820EVM: BQ25820: Schematic and Layout Checklist

    Part Number: BQ25820EVM Other Parts Discussed in Thread: BQ25820 Tool/software: Hello all, Here is the BQ25820 Schematic and Layout Checklist: BQ25820_Schematic_And_Layout_Checklist NEW.pdf Best Regards, Christian Moyer

  • [FAQ] BQ25820: BQZ File For BQStudio

    Part Number: BQ25820EVM Other Parts Discussed in Thread: BQ25820 , BQSTUDIO Tool/software: Hello, Here is a link to the BQ25820 BQZ file: https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/Charger_5F00_1_5F00_00_2D00_bq25820…

  • [FAQ] What Makes an I2C Buffer Hot-Swappable?

    Other Parts Discussed in Thread: TCA9511A FAQ: Logic and Voltage Translation > IxC >> What Makes an I2C Buffer Hot-Swappable ? Hot-Swap also known as Hot-Plug means the unpowered device can be inserted into a live backplane without disruption of service…

  • [FAQ] TDA4VM-Q1: SR2.0 update Keywriter process

    Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM Tool/software: Hi Customer, This FAQ is about TDA4VM SR2.0 HS Keywriter , there is some change need apply to Default keywriter: 1. Download and Install ti-processor-sdk-rtos-j721e…

  • [FAQ] DRV8718-Q1: Gate driver high side configuration use case, negative spike concern without external (shotteky) diode.

    Part Number: DRV8718-Q1 Other Parts Discussed in Thread: DRV8706-Q1 , , DRV8702-Q1 , DRV8106-Q1 , DRV8705-Q1 , DRV8714-Q1 , DRV8703-Q1 Tool/software: DRV8702-Q1, DRV8703-Q1, DRV8106-Q1, DRV8705-Q1, DRV8706-Q1, DRV8714-Q1, DRV8718-Q1 Gate driver can…

  • [FAQ] DP83867E & DP83869HM: Expected Back-Powering on Power Supply Pins

    Part Number: DP83867E Other Parts Discussed in Thread: DP83869HM Tool/software: The following FAQ applies to the DP83869HM and all versions of the DP83867: E/IS/CS/IR/CR The Analog Supply pins (VDDA2P5 & VDDA1P8) power the MDI portion (connector…

View FAQ threads
Recommended For You