Frequent Questions

  • [FAQ] How to Confirm Ethernet PHY Strapping

    Other Parts Discussed in Thread: DP83869 Our Ethernet PHYs have Hardware Bootstraps that allow the PHY to be configured without the need for register access and also set the PHY ID. Either one of these being mismatched can cause issues, e.g. PHY is configured…

  • [FAQ] List of FAQs for TPS922055 / TPS922054 / TPS922053 / TPS922052 LED driver

    Other Parts Discussed in Thread: TPS922052 , TPS922055 , TPS922054 , TPS922053 KEEP UPDATING... This thread provides a list of frequently asked questions for TPS922055 / TPS922054 / TPS922053 / TPS922052 LED driver. You can click on the below link to…

  • [FAQ] TPS65931211-Q1 used with AM62A for eFuse programming: If there are any limitations with respect to the key writer software implementation of "LDO1_CTRL/LDO2_CTRL" registers

    Part Number: TPS6593-Q1 Does LDO1&LDO2 power on by default? As we leave the GPIO9&GPIO11 float and PCB has been gerber out, we can't control the LDO on through GPIO9&GPIO11 now. If we use software implementation of "LDO1_CTRL/LDO2_CTRL" registers, does…

  • [FAQ] TPS650350-Q1: How can I get design documents for TPS65035xx-Q1 devices?

    Part Number: TPS650350-Q1 The design documents (datasheets and TRM) are on TI MySecure folder. Users with TI NDA signed can request access from the link below: www.ti.com/.../swlicexportcontrol.tsp Once approved, design documents can be accessed…

  • [FAQ] AM62A7 / AM62A7-Q1 / AM62A3 / AM62A3-Q1 / AM62A1-Q1 and AM62D-Q1: Internal pull configuration registers for MCU_I2C0 and WKUP_I2C0

    Part Number: AM62A7-Q1 Other Parts Discussed in Thread: AM62P Hello Experts, In the TRM, there is following description >These bits do not apply to "I2C OD FS" buffer types as these IOs do not have internal pull registers. >The MCU_I2C0 and WKUP_I2C0…

  • [FAQ] AM64x, AM243x (ALV, ALX), AM62x, AM62Ax, AM62Px, AM62D-Q1, AM62L Custom board hardware design - Collaterals for Reference during Schematic Design and Schematics Review

    Other Parts Discussed in Thread: AM6442 , AM6411 , AM6422 , AM6412 , AM6421 , AM6441 , AM2434 , AM2432 , AM2431 , AM625 , AM623 , AM625-Q1 , AM620-Q1 , AM625SIP , AM62L , AM62A7 , AM62A3 , AM62A1-Q1 , AM62A7-Q1 , AM62D-Q1 , AM62P , AM62P-Q1 Hi TI Experts…

  • [FAQ] AM3352: LCD display may flicker by using LCD controller

    Part Number: AM3352 Other Parts Discussed in Thread: DS92LV2412 , DS92LV2411 , Hi, The AM3352 and LCD are not directly connected, but are configured as AM3352 → LCD serialiser(DS92LV2411) → LCD deserialiser(DS92LV2412) → LCD. The flickering frequency…

  • [FAQ] What is Creepage and Clearance in Isolated Switches and Switch Drivers?

    Other Parts Discussed in Thread: TPSI2140-Q1 Creepage and Clearance in Isolated Switches and Switch Drivers Creepage and clearance distances are industry standard requirements that dictate the minimum spacing between the any two exposed metal contacts…

  • [FAQ] AM62A7 / AM62A7-Q1 / AM62A3 / AM62A3-Q1 / AM62A1 / AM62A1-Q1 and AM62D-Q1 - Custom board hardware design - Schematic Review Checklist

    Part Number: AM62A7-Q1 Other Parts Discussed in Thread: AM62D-Q1 , AM62A7 , AM62A3 , , AM62A3-Q1 , AM62A1-Q1 , SK-AM62A-LP , AUDIO-AM62D-EVM Hi Team, Do we have a schematic checklist spreadsheet for customers to fill out for schematic reviews or is…

  • [FAQ] TDA4VM: How do I configure/enable port mirroring in CPSWnG?

    Part Number: TDA4VM How do I configure/enable port mirroring in CPSWnG?

View FAQ threads
Recommended For You