Frequent Questions

  • [FAQ] TPS25984B: SOA plot for the device

    Part Number: TPS25984B Tool/software: Requesting the SOA or AOA plot for the TPS25984B device.

  • [FAQ] MSP Tool Resources

    Other Parts Discussed in Thread: UNIFLASH , SYSCONFIG [Click here to return to homepage] MSPM0 TOOLS Listed below are a variety of documents and FAQs to assist with the MSPM0 toolchain Getting started guide and tool downloads: List of MSP…

  • [FAQ] DM R5F can crash in certain conditions: AM62x, AM62Ax, AM62Dx, AM62Px, AM67, AM67A

    Other Parts Discussed in Thread: AM67 , AM67A This is the companion FAQ for [FAQ] [Alert] DM R5F can crash in certain conditions: AM62x, AM62Ax, AM62Dx, AM62Px, AM67, AM67A Please read the alert first. General questions What is the root cause…

  • [FAQ] AM62L ( AM62L32 , AM62L31 ): Custom Board Hardware design - PORz and RTC_PORz slew rate

    Part Number: AM62L Tool/software: Hi TI Experts, Usually add RC filter on RESET signal to anti-noise, but the slew rate requirement of RESET signal on AM62x datasheet is quite sharp, on customer board it is about 10V-100V/ms, can it meet AM62x reset…

  • [FAQ] TDA4VH-Q1: Enable Display Frame Freeze safety feature in openvx

    Part Number: TDA4VH-Q1 Tool/software: DSS includes a hardware-enabled freeze frame checker at each pipeline output and vp output. When enabled, it generates a data signature of pixels from a user define region for each frame. The current frame signature…

  • [FAQ] AM62L ( AM62L32 , AM62L31 ) Design Recommendations / Custom board hardware design – Guidelines and E2E query links for custom board designers to refer

    Part Number: AM62L Tool/software: Hi TI Experts I see the below status on TI.com for AM62L Can you provide additional inputs on the collaterals to be referred or guidelines to follow during custom board design

  • [FAQ] HDC3020: HS400x/HS401x & HS410x/HS411x EOL Replacement | HDC3x Relative Humidity & Temperature Sensor

    Other Parts Discussed in Thread: HDC3120 , HDC3020 I currently have an HS4x humidity sensor in my system which is now EOL. Do you have a footprint-compatible replacement? If so, what do I need to migrate to that sensor?

  • [FAQ] BQ27Z758 FAQs

    Part Number: BQ27Z758 Tool/software: BQ27Z758 FAQ Home Page This is the home page for common questions in relation to the BQ27Z758 . FAQs Related FAQ home pages: Impedance Track FAQ home page What Information does TI need to help with…

  • [FAQ] BQ27Z758: How do I obtain the most up-to-date data flash address map?

    Part Number: BQ27Z758 Other Parts Discussed in Thread: BQSTUDIO , EV2500 , EV2400 Tool/software: When using another host other than BQStudio and the EV2400/EV2500 to program or access any of the data flash parameters, it is imperative that you have the…

  • [FAQ] BQ27Z758: What FW should I use on the BQ27Z758?

    Part Number: BQ27Z758 Other Parts Discussed in Thread: BQ27Z746 , , BQSTUDIO Tool/software: The BQ27Z758 battery fuel gauge runs using the exact same firmware (FW) as the BQ27Z746/BQ27Z746-R1. It is recommended to download and program the latest…

View FAQ threads
Recommended For You