Frequent Questions

  • [FAQ] AM2612: USB: DFU and SBL DFU application not working

    Part Number: AM2612 Tool/software: Hi TI experts, I am using the AM261x-LP board and running into the following USB issues: I tried running the SBL DFU application via the dfu-util tool provided. I am not able to get the device to enumerate after…

  • [FAQ] UCC27714: What are the design considerations for split ground half-bridge gate driver in high voltage applications?

    Part Number: UCC27714 Tool/software: There are numerous 600V half-bridge gate drivers available in 8 pin SOIC packages and also higher pin count 14 pin packages. With the 8 pin SOIC package, only the basic half-bridge gate driver functions are available…

  • [FAQ] TDA4VH-Q1: How do I control the quality of service (QoS) and class of service (CoS) settings on TDA4 devices to balance transaction loads and priorities?

    Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VH , J784S4XEVM Tool/software: I'm seeing issues with the display experiencing sync losts when running the TIDL AVP demo. How do I balance the transaction loads and priorities so that the DSS…

  • [FAQ] AM62x, AM62Px, AM62D-Q1, AM64x, AM243x: 4KB Sector Erase Fails

    Part Number: PROCESSOR-SDK-AM62X Tool/software: Greetings, When working with a flash part like S25HL512T or S28HS512T , one will come across Uniform vs Hybrid mode. The points which this FAQ covers is: What is Uniform vs Hybrid Mode for the…

  • [FAQ] SK-AM62A-LP: Is USB OTG possible without PD controller?

    Part Number: SK-AM62A-LP Other Parts Discussed in Thread: AM62P , SK-AM62P-LP , PROCESSOR-SDK-AM62A Tool/software: Hi, For my application, I don't need PD controller for power negotiation. But in SK-AM62A-LP design, PD controller is also used for…

  • [FAQ] TDA4VM: Error while registration of same MAC address with different VLAN to ETHFW server from client.

    Part Number: TDA4VM Tool/software: ETHFW returns error while registration of same MAC address with different VLAN from same client. This issue is observed on 10.1 TI SDK.

  • [FAQ] MCU-PLUS-SDK-AM261X: Unable to import networking (enet-cpsw) examples in CCS workspace

    Part Number: MCU-PLUS-SDK-AM261X Tool/software: Hi TI experts, I am unable to import Networking (Enet CPSW) examples in CCS workspace from the AM261x MCU+ SDK.

  • [FAQ] MCU-PLUS-SDK-AM261X: Unable to locate Networking (Enet CPSW) examples in the AM261x MCU+ SDK

    Part Number: MCU-PLUS-SDK-AM261X Tool/software: Hi TI experts, I am unable to find ethernet networking (enet cpsw) examples in the MCU+ SDK for AM261x. For AM263x and AM263Px, I am able to locate the examples inside the <mcu_plus_sdk>/examples/networking…

  • [FAQ] AM62A7: How to Enable Edge Enhancement on TDA4x/AM6xA

    Part Number: AM62A7 Tool/software: I have my tuned DCC Edge Enhancement binaries, how do I enable EE modules to take effect on my (SK) Edge AI device?

  • [FAQ] MCU-PLUS-SDK-AM261X: PRU IO: Cannot find PRU project in MCU PLUS SDK

    Part Number: MCU-PLUS-SDK-AM261X Tool/software: Hi Champs, Customer is not able to find PRU projects in MCU PLUS SDK example folder?

View FAQ threads
Recommended For You