• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 49 subscribers
  • Views 162 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

OPA857EVM-978: Why am I getting 0V at both outputs (VOUTN = VOUTP = 0V)?

OPA857EVM-978: 0 Volts at OUTN and OUT pin in both Test and APD mode.

Amar Gaikwad
Prodigy 10 points
Part Number: OPA857EVM-978
Other Parts Discussed in Thread: OPA857

Hello,

I am getting 0 Volts at OUTN and OUTP pins in both the TEST and APD mode. Vcc is 3.3 Volts. Ideally, I should have got 1.83 V at the OUTN pin.

Regards,

Amar

  • 0
    TI__Genius 16706 points

    Hi Amar,

    I agree that you should have gotten 1.83V at the output. Did you measure 0V at the output of the OPA857 or at the output of the T1 transformer? The transformer will only output AC signals and it will have a DC output of 0V.

    Best regards,

    Sean