• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 2192 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA 128 Amplifier

Hariprasad R
Prodigy 10 points
Other Parts Discussed in Thread: INA128

Hi

 

I have load cell of capacity 2kg which gives 6mv output full scale for 10 volts excitation. I want to amplify the output to 18mv full scale.

 

Can any one suggest me a amplifier circuit using INA128 with gain and offset adjustment.

 

Thanks in advance.

Hariprasad

  • 0
    Guru 21975 points

    Hariprasad,

    There are many possible variations in the amplifier design for your load cell. Please look at the most basic circuit shown in figure 4 of the data sheet as you consider some of the issues.

    What power supplies do you have available? If the output is ground-referenced, you will need a positive and negative power supply. Possible power supplies might range from +/-5V to +/-15V

    Do you have a reference voltage available for excitation? What is the voltage? It is not necessary to use 10V excitation. In fact, one possible way to adjust the gain is by varying the excitation voltage.

    What is the resistance of the load cell?

    What will the output be driving?

    Any additional details you can provide might allow us to better answer your question.

    Regards, Bruce.