• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 286 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA855: OPA855 Design reference

jeno.zhang
Expert 2285 points
Part Number: OPA855

Hi，

OPA855 is used as a voltage amplification circuit, SIPM optical signal acquisition, with a bandwidth of 200MHz and a gain of 20. When the optical signal is relatively large, the signal output is distorted. Is there any relevant reference design and PCB layout considerations available? Thanks！

  • 0
    TI__Mastermind 24145 points

    Hello Jeno,

      Would it be possible to share your schematic + images of the PCB layout with us? If you are unable to share these publicly, you may send me a private message by clicking on my E2E profile.

      Also a few questions:

    1. What is the diode (SiPM) capacitance?
    2. What is the input current range?

    Thank you!
    Sima