Dear Sir or Madam,
I am writing to know the terminal finish of OPA2333AID if it is NiPdAu or NiAu or Au. Please could you tell me the thickness of Au.
Thanks in advance.
Best Regards,
Kaoutar Ben Kaddour
HI Kaoutar,
The OPA2333AID lead finish material is NiPdAu. You can find OPA2333AID detailed quality, reliability and packaging information on the link below:
https://www.ti.com/quality-reliability-packaging-download/report?opn=OPA2333AID
You can also locate this information on the product landing page, by navigating to the OPA2333 product page, under "Ordering & quality" and selecting the part number:
https://www.ti.com/product/OPA2333
Thank you and Regards,
Luis
Most packages use NIPDAU finish while VSSOP (DGK) package uses NIPDAUAG - see below.
Hi Kaoutar,
The Au plating thickness should be in the range from 30-150 Angstrom for NiPdAu terminal finish per the application note below.
Please see application note below regarding the Nickel-Palladium-Gold Integrated Circuit Lead Finish:
https://www.ti.com/lit/an/szza031/szza031.pdf
Thank you and Kind Regards,
Luis
