Other Parts Discussed in Thread: OPA549
Dear Technical Support Team,
Is it possible to configure Parallel OPA548EVM for twice output current such as 6A?
Target is 4A, so OPA549 is the best. But it isn't released EVM.
Best Regards,
ttd
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi ttd,
Is it possible to configure Parallel OPA548EVM for twice output current such as 6A?
Yes, it is possible, but there may be other better options. Please let me know the high current application and design requirements.
Below is the application note that talks about parallelling two power amplifiers to increase the output driving current.
https://www.ti.com/lit/an/sboa553a/sboa553a.pdf?ts=1689656623769
If you have other questions, please let me know.
Best,
Raymond