The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 215 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC23C11: Signal Amplification and rectification to CMOS logic

Gaurav Gupta52
Intellectual 265 points
Part Number: AMC23C11

Hi,

I want to drive a relay through leakage current detection. The leakage current sensor provides an output of 20mV. The same needs to be converted into 3V3 to drive a relay through MOSFET. Kindly suggest the available solution for the same. The block diagram for the same is attached below: