This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA454: OPA454 simulation issues

Part Number: OPA454

Hi TIer

My customer use TINA simulate the OPA454 but they can not output right value.

At this time, the output is always 35V. Please help me check this simulation model?

Thank you very much. 

  • Hi Yuxi, 

    Enclosed is the simulation that is similar to what your doing. 

    OPA454 E2E 12062023.TSC

    The op amp has Vcm requirements, please pay attention to the input range.

     

    Under the OPA454 product page under the Design & development tab, there are examples of the schematic. You can download and modify it from there. 

    If the issues are resolved, please close this inquiry. If you have other questions, please let us know. 

    Best,

    Raymond

  • Hi Yuxi, 

    I am going to close this inquiry for now. 

    If you have other question. please let me know. 

    Best,

    Raymond