Hi sir,
As topic, our TL103WB Vos is 2mV, but Diodes AP4310EMTR-G1 Vos is 0.5mV. (4x higher)
Customer concerns it would impact the regulation accuracy.
Is there any work around solution?
Thanks a lot!
BR,
Sean Liao
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi sir,
As topic, our TL103WB Vos is 2mV, but Diodes AP4310EMTR-G1 Vos is 0.5mV. (4x higher)
Customer concerns it would impact the regulation accuracy.
Is there any work around solution?
Thanks a lot!
BR,
Sean Liao
Hi Sean,
Is the customer looking at typical or maximum offset voltage specification? In either case, the TL103WB has a lower typical and maximum offset voltage when compared to the AP4310EMRT-G1.
AP4310EMRT-G1 datasheet copied below for reference:
Please let me know if you have further questions.
Thank you!
Best Regards,
Ashley