UCC28950-Q1: Documentation TIDA-020031

Patrik Molnár

Part Number: UCC28950-Q1
Other Parts Discussed in Thread: UCC28951-Q1, UCC28950

Tool/software:

Hi, we are using your UCC28951-Q1 in a project we are working on (DC/DC 400/12V). I know there is a project TIDA-020031 where you use this component in the same application. I have both the design guide and schematic for this application. We are having minor issues with the same design, could you also provide us the BOM or altium files for this application. I know it was available on your website but I can't find it anymore. Would it be possible?

over 2 years ago

0 Mike O' over 2 years ago

TI__Guru* 86286 points

Hello,

I could not find the TIDA-020031 on ti.com. Could you send a me a link to the design please?

Regards,

0 Patrik Molnár over 2 years ago in reply to Mike O'

Prodigy 35 points

That's exactly the problem. I can't find this project on your website anymore. I did download the design guide and schematic 3 months ago. I haven't looked at it since then and now I can't find it anymore. But I'm sure it exists...look at the pdf I sent. For this project you had a whole website with all the documents and altium files.TIDUEY2 (1).PDF

0 Mike O' over 2 years ago in reply to Patrik Molnár

TI__Guru* 86286 points

Hello,

I have received your inquiry and it is under review.

Regards,

0 Patrik Molnár over 2 years ago in reply to Mike O'

Prodigy 35 points

Hi,

great, thanks for the quick response. I look forward to your reply.

Best regards,

0 Mike O' over 2 years ago in reply to Patrik Molnár

TI__Guru* 86286 points

Hello,

The design was done by systems engineering and marketing (team). I am going to assign this to someone on there team so they can help you with it.

The following link will bring you to an application note that goes through the step by step design process of a phase shifted full bridge using the UCC28950. There is also a link to the excel design tool in the application note that uses the same equations in the app note.

https://www.ti.com/lit/pdf/slua560

Regards,

0 Patrik Molnár over 2 years ago in reply to Mike O'

Prodigy 35 points

Hi Mike,

I understand and thank you for your reply. It would be great if you could find someone who was in charge of this application because of course I have the application note (UCC28950) but that doesn't help me, mainly design files (altium, gerbers or BOM) would help us. Because we have a problem in the design of this application, not in the component itself.

Best regards, PM.

0 Patrik Molnár over 2 years ago in reply to Mike O'

Prodigy 35 points

Hi Mike,

I have one question. Is it possible to buy this whole demoboard? The whole application TIDA-020031? Where can we order it?

Amplifiers

Amplifiers forum

UCC28950-Q1: Documentation TIDA-020031