Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 46 subscribers
  • Views 751 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

V to I converter

manjunath kamasani
Prodigy 30 points
Other Parts Discussed in Thread: OPA547, TLV4111, XTR110

Thanks for your  reply. As u suggested me before, Two possible op amps might be the TLV4111 and the OPA547. But what i feel is that, these two op-amps output current range is little high.

Dear Sir,

I am Manjunath k, I am a student of SJCE, Mysore. I am pursuing masters in Industrial Electronics. Currently i am in 4th semester doing a project.

 Designing a V to I converter is part of my project. Voltage range is 0-5v and the output current range should be 0-100mA.

I found that XTR110 Op Amp would be a ideal choice for this. I need your say on this. Is it the best choice?

Hope to hear from you soon.

Warm Regards,

Manjunath Kamasani