• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 573 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLE2062 Output Impedance

Shihab
Expert 1195 points
Other Parts Discussed in Thread: TLE2062AM

Hi,

The open loop impedance of TLE2062AM is given as 560 ohm.

Why it is very less in Figure 23?

Thanks,

Shihab.

  • 0
    TI__Guru 62590 points

    Shihab,

    The curves below show the close-loop output impedance for different gains BUT with the increase in frequency, as the op amp runs out of loop-gain, they should all collapse on the value equal to open-loop output impedance of 560 or 280 ohms; this is properly shown in the graph on the left but NOT in the graph on the right; I believe in the latter case, the vertical axis has been corrupted and incorrectly expressed on a linear instead of logarithmic scale.