INA260EVM: Selecting an EVM

mark reimlinger

Part Number: INA260EVM
Other Parts Discussed in Thread: INA233EVM, INA226EVM,

I'm looking to choose between the INA260EVM, INA226EVM, and INA233EVM. The integrated shunt resistor of the 260 is nice, but not absolutely required. I'm wondering if I can record data from three of these simultaneously. The INA226EVM specifically mentions the ability to save data on page 21 of the user guide, but I didn't see that function mentioned in the user guides for the 260 and 233 - can they record data?

Thanks,

Mark

over 6 years ago

0 Peter Iliya over 6 years ago

TI__Mastermind 26840 points

Hey Mark,

Just looking through the INA260EVM GUI, there is a "Data Logging" feature in the Operate tab so this EVM software should be capable to capture data. The INA233EVM does not have this so it can't capture data.

There are a couple things to note. The data transmission with the EVM software and EVM is not fast and there will be data loss if you try to capture data quickly with the EVM.

Sincerely,
Peter Iliya
Current Sensing Applications

0 mark reimlinger over 6 years ago in reply to Peter Iliya

Prodigy 50 points

OK, thanks for the heads-up

Amplifiers

Amplifiers forum

INA260EVM: Selecting an EVM