TLV9102: Slew Rate at 3.3V or 5V

Fabio Soriano

Part Number: TLV9102
Other Parts Discussed in Thread: TLV9002

Hi Team,

I received a request from a customer I'm following.

In datasheet are indicated only value with Vs=16V

There are indication of SR and settling time at 3.3V or maximum 5V?

Is available any chart with SR VS Temperature and SR VS Voltage?

Regards,

Fabio

0 Ron Michallick over 5 years ago

Fabio,

Lower supply voltage does affect slew rate. Data available this week.

For 3.3V or 5V, I would suggest looking at TLV9002 where these voltages are close to the full "tuned" range of the op amp

0 Ron Michallick over 5 years ago in reply to Ron Michallick

Fabio,

Slew rate when Vs = 3.8V or more is linear, but positive slew rate becomes bi-rate below that. The tables below show the slower rate at 2.7V

I have data at -30C because the temperature forcing unit would not go to -40C.

0 Fabio Soriano over 5 years ago in reply to Ron Michallick

Thanks Ron!

Amplifiers forum