PGA113: unused MUX pin termination

Renan Santos Adriano

Part Number: PGA113

HI Team,

My Customer wants to know what is the best way to terminate the unused Ch0 pin of PGA113? They do not need the mux feature in their application.

Thanks in advance.

Regards,

-Renan

0 Luis Chioye over 4 years ago

HI Renan,

If the customer is not planning to use Channel-0, using a 1-kOhm pull-down resistor to GND should prevent any noise coupling into the device.

Thank you,

Best Regards,

Luis

Amplifiers forum