THS6301: Looking for a G.FAST compatible receiver.

Hi Babiker,

Thank you answering.

Is there a lineup of G.FAST compliant receivers?

Best Regards,

Kenji

Perhaps a little more detail Kenji, 

Most G.Fast reference designs use integrated chips with PGA receivers integrated. If, however, you're doing bench work and need some suitable receiver channel, you might check this article out where I was doing G.hn driver characterization and needed a very low distortion sense path - we ended up using a data acquisition board we had developed for some ADC's, but some of the ideas here might prove useful, 

Part 1 is about the source signal buffer stage using an 8th order passive RLC filter to a really low HD FDA driver

Part 2 is picking off the signal and dealing with it for MTPR - specifically testing the impact of hanging off state drivers on the line looking for degradation. 

The original EETimes links appear to be gone at this point - here are pdf's of the originals in my files, 

Linearity Testing for G.hn PLC Line Drivers Part 1 of 2.pdf

Linearity Testing for G.hn PLC Line Drivers Part 2 of 2.pdf