Other Parts Discussed in Thread: LMH6609, TINA-TI
Hello,
Our customer wants to run TINA TI to see phase margin of LMH6611 application.
Where can we get Spice model of LMH6611?
Regards,
Mochizuki
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Morning Mochi,
TINA V11 library had one, attached as a V9 file, this is from 2008 and says it is a LMH6609 model inside the netlist
Hello Mochizuki,
Also, for future reference, to find LMH6611 and other parts' Spice models, click on the design and development tab in the LMH6611 product overview/homepage. From there, you can locate and download the models done for the device within the first section of the page. To use a Pspice model in TINA-TI, extract the zip folders until you reach either a .lib, .cir, or .mod file. Insert the file into TINA-TI by selecting Tools, New Macro Wizard, then browse and select the .MOD file. Press Next, load shape from library, and select an amplifier shape with the right amount of pins. Select next, assign the pins to the right areas of the amplifier symbol, select save and now it is ready to be inserted anywhere in the open schematic. Here is a more in-depth guide of the process: http://www.ti.com/lit/an/slva527/slva527.pdf and in video format: https://training.ti.com/importing-spice-models-tina-titm-simulator. Start at Figure 3 in this case.
Thank you,
Sima