• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 243 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA301: output offset add

ryanhjq
Prodigy 40 points
Part Number: INA301
Other Parts Discussed in Thread: INA302

hi

IN301 is a fix gain opa without outside Resistor. how can I add an offset to the output like the normal opa by adding a ref in the positive opa input without affecting the gain? thanks a lot.

  • 0
    TI__Genius 16150 points
    You cannot do that with the INA301. It is only intended for uni-directional current measurement.

    The INA302 which has the same current sense amplifier performance but with dual comparators has a REF pin to configure it for bi-directional current measurement - i.e add offset to the output for zero differential input.