OPA2333: Replace TSZ122IST

Here is the OPA333 LG sim,right about 398kHz GBP - not the 350kHz in the data sheet

Same setup below with theST part, 

Almost identical GBP, maybe a little more PM at Aol=0dB

Here is the LG file with the ST part, FYI, 

TSZ121_ST Chopper.TSC

Morning, kind of looking at  that nice spec comp Tamara put in earlier - if I do the same thing using the parametric tool I get this. That TLV2333 would be a lower cost option, kind of in the 0.70 region 1k, 

Oh and incidentally, that 350kHz GBP is incorrect for the x333 family. Not sure where that came from but the TINA model (just updated) shows 400kHz, matching the ST part. I tried to review these issues in this recent article, not an uncommon mistake. This one includes a new mapping to closed loop F-3dB vs phase margin. 

https://www.planetanalog.com/why-is-amplifier-gbp-so-confusing-insight-12/

The max supply current per amplifier in the parametric table for the TLVx333 was perplexing - that 17uA number is typical not max. That is a mistake in the database - PDS shows 29uA max for the TLVx333, > 25uA max for the OPAx333 parts - what I would expect for these DC relaxed spec TLV versions.