This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: LMH32401
Our customer wants to make output in: 1.6V-2V.
So VOCM should be set to 1.8V
VOD should be set according to below formula: VOD=0.4V
And my suggestion is right? But I am not sure whether VOCM could be set to 1.8V according to the datasheet.
Would you be able to share the customer's schematic: including details of the input signal range, supply range, and output range at OUT- and OUT+. If you are unable to share this on the public forum, feel free to send me a private email or private message on e2e.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to SimaJalaleddine:
I will be closing this thread; since, the issue has been taken offline.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.