Hi team,
I don't use GPIO1-3 and would like to keep them Low.
1. Could you advise the recommended unused GPIO termination and register settings?
- just disable GPIOs are OK or need external pull down?
2. If I set Page:0x0/Addr:0x21/D[7:4] = 0d, D[2:0] setting is still active?
3. If I set Page:0x0/Addr:0x21/D[7:4] = 0d, Page:0x0/Addr:0x26/D[7] setting is active or ignored?
regards,