Hi there,
The CDCLVD1213 datasheet doesn't explicitly say what to do with the Vt input when the clock source is DC-coupled to the chip. Should it be left open? Should it be bypassed to ground with a capacitor? Or something else?
Thanks,
Ryan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi there,
The CDCLVD1213 datasheet doesn't explicitly say what to do with the Vt input when the clock source is DC-coupled to the chip. Should it be left open? Should it be bypassed to ground with a capacitor? Or something else?
Thanks,
Ryan
Hi Ryan,
Please leave it floating.
Regards,
Derek Payne