LMK03318: Programming a custom PLL (LMK03318) via Tics Pro SW & USB to I2C Elite

Omer Kvitel

Prodigy 140 points

Part Number: LMK03318
Other Parts Discussed in Thread: USB2ANY

I would like to know if I can configure my on board PLL via the TICS Pro SW and USB to I2C Elite programmer

(https://i2ctools.com/product/usb-to-i2c-elite/)

Regards

Omer

over 3 years ago

0 Hao Z over 3 years ago

TI__Mastermind 18070 points

Hi Omer,

To use Ticspro you must have either the EVM or the USB2ANY dongle. https://www.ti.com/tool/USB2ANY

But alternatively, you can export the hex registers from Ticspro (File -> Export hex registers) then paste the register content to your own I2C platform.

Regards,
Hao

Clock & timing

Clock & timing forum

LMK03318: Programming a custom PLL (LMK03318) via Tics Pro SW & USB to I2C Elite