LMK05318BEVM: EVM evaluation

ACGUY

Part Number: LMK05318BEVM

Hello E2E,

Our customer is working for evaluation with LMK05318B-EVM.
It able to behavior when cascade mode, but it doesn't LOCK with select to XO.
I received the tsc file from customer, I attached it. Please see it and advice for us.

Best regards,
ACGUY

400M_XO2.tcs

over 1 year ago

0 ACGUY over 1 year ago

Guru 11170 points

Hello E2E,

Our customer is looking forward reply from TI. Please look this thread.

Best regards,
ACGUY

+1 Jennifer Bernal over 1 year ago in reply to ACGUY

TI__Genius 10875 points

Hi ACGUY,

I also cannot attain DPLL phase lock (LOPL_DPLL = 1) with the configuration you shared. Please try these steps:

Load the new configuration by going to File -> Load
2. File: e2e_LMK05318BEVM EVM evaluation_400M_XO2_nov 10 2022.tcs
Click on Soft-reset Chip
Navigate to Status page. Click on Read Status. You should see that all Status bits are cleared (except LOL_PLL2 since PLL2 is disabled) and PRIREF_VALSTAT=1 (PRIREF is validated)

For additional TICS PRO walkthrough, please refer to this guide: 2526.LMK05318B TICS Pro GUI Overview.pdf

Regards,

Jennifer

Clock & timing

Clock & timing forum

LMK05318BEVM: EVM evaluation