This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2572EVM: Issue generating a generate a 100 MHz signal

Part Number: LMX2572EVM

Hi Team,

My end goal is to generate a 100 MHz signal at +2.5 dBm with the TICS Pro software.

I can manually click USB communications > Write All Registers.

I know I can edit the number next to the output frequency to adjust the gain but my spectrum analyzer is showing the output is not a clean 100 MHz. Any thoughts? My setup is below.