• State Resolved
  • Replies 2 replies
  • Subscribers 21 subscribers
  • Views 83 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

LMK04805: Read Register data issue

Stanislau Rudzikau
Prodigy 10 points
Part Number: LMK04805
Other Parts Discussed in Thread: USB2ANY, CODELOADER

Tool/software:

Hello. We would like to use LMK04805 to distribute clock signals between the chips on our PCB. We made custom PCB to explore the possibilities.

We want to configure the LMK04805 chip in the TICS Pro application. To connect to the LMK04805 chip we use USB2ANY.

The question is : In the TICS Pro application, the Read button is disabled. How to read back written data? 

Looking forward to your kind support.

Best regards, Stanislau.

  • +1
    TI__Mastermind 29820 points

    TICS Pro doesn't currently support readback on this device. When we migrated the profile from CodeLoader, readback was not implemented.

    I attempted to update the profile to support readback, but eventually I was hindered by some kind of strange issue with uWire readback functions in the uWire drivers. Without an update to the core binary, readback through TICS Pro is not currently possible. This feature may not be added to these profiles for a while - LMK0480x devices are over a decade old and add significant complexity to the uWire readback drivers, and we just don't have the time to address this right now.

    At this point, my only recommendation is to use an alternative controller to USB2ANY and TICS Pro if readback is required.

  • 0 in reply to Derek Payne
    Prodigy 10 points

    Dear Derek!

    Thank you for your promt respnose! We will try to find different soultion.