• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 269 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCM9102: how to select crystal of CDCM9102

Longchang Chen
Intellectual 1350 points
Part Number: CDCM9102

there is recommendation of input crystal of CDCM9102 in d/s, how to select it? whether there is some spec need about crystal?

many thanks 

  • 0
    TI__Expert 8865 points

    Hello Andy,

    The datasheet section 9.4.1 had the details regarding the xtals. There are some recommended xtals specified for which the device was characterized. you can use any xtal, but the ones with low pullability should be preferred (with low motional capacitance).

    Regards

    Puneet