• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 20 subscribers
  • Views 536 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK04610EVM: How to set user frequency in TICS pro

Sho Ogane
Genius 5575 points
Part Number: LMK04610EVM

Hi all.

I would llke to output my user frequencys on EVM by TICS pro.

CLKIN1=122.88MHz(LVCMOS)
VCXO=122.88MHz(on board)
OSCout=122.88MHz(LVPECL)
CLKout1 to CLKout10=122.88MHz(defferential)

However, OSCout was not locked.(LED1 is not output) and CLKout is not out.
Sorry, I don't know which setting button I should change on TICS pro.

So please give me  your reference setting.
Could you send import file?

Best Regards,
Sho 

  • 0
    TI__Expert 8865 points

    Hello Sho

    Just start the TICSpro and load the default state. You can find the default state under "default configuration" drop down menu.

    After  loading that, please press "Device Start button on the "Generic" tab from the left had side.

    OSCout is dissabled in this configuration. You can enable that from "OSCin OSCout" tab.

    or just load the attached configuration and then press  "Device Start" button.

    Best regards

    Puneet

    config_LMK04610.zip

  • 0 in reply to Puneet Sareen
    Genius 5575 points

    Hello Puneet san

    Thank you for your reply!
    I understood setting sequence.
    I will try to set frequency with your advice.

    If I have other question, please help me.

    Best Regards,
    Sho