Team
One thing, I would like to share is below.
Currently I am under competition with competitor Part from ONSEMI.
And my customer has informed that the part has total 4mA current consumption with 52MHz output x 2channel.
Could you have to get a way to reduce the current consumption to simillar level with competitor? (I think competitor has a LDO bypass mode to reduce the current consumption)
My customer will use the lower current consumption part. Please review and let me get your advice here.
-
VBAT : 3.3V / 3.6V / 4.2V
- Requirements
- Current Consumption Data
- Condition
- VBAT : 3.3V / 3.6V / 4.2V
- Cap Load : 10pF
-
-
-
26MHz output working at both CLK_OUT1 & CLK_OUT2
-
26MHz output working at the only CLK_OUT1
-
52MHz output working at both CLK_OUT1 & CLK_OUT2 (Competitor has 4mA current consumption)
-
52MHz output working at the only CLK_OUT1
-
-
Thansk and Best Regards
Billy Yun