• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 195 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LMX2582EVM: LMX2582EVM Burst or Ramp Mode

LMX2582EVM: Time delay in Burst mode

Waldemar Kunysz
Prodigy 30 points
Part Number: LMX2582EVM

What is the smallest delay time increment in the Burst mode?

Which register control the time delay between different settings of R38 or R45 registers?

Waldemar

  • 0
    TI__Genius 11900 points

    Hello Waldemar,

    What time delay are you looking to implement? I do not understand your second question?

    You need to write to register R38 and then write to registers R45. There is no register that can be set to control the time delay, this will be dependent on when you write to the two registers.

    Thanks,

    Vibhu