Hi,
I want to work with ADS1192 Eval-kit. When I installed the software according to the procedure in User guide, I did not restart my computer immediately. I selected Restart another time.
Now, when I open ADS1x9x ECG-FE Evaluation Software, I get the following error.
Also when I wanted to Start Streaming data, it showed following error.
What do I need to do now?
Thank you,
Vedashree
For error code 8, I added 'saved' file in the path that is specified in the error.
I attached the EV module as shown below,
It then showed the following error.
In the user guide it is shown as follows,
But in my system, the EV module name is not shown.
Also when I connected my EV module for the first time, it my system did not prompt a window as specified in the User guide,
But, when I see in the specified folder path where the USB Drivers were supposed to be installed, below were the files
My system has Windows 10 OS.
Please help.
I followed the post below,
and created 'Saved' folder as mentioned previously, also unchecked 'Read only'. The link mentioned in the post for getting help is not working --> e2e.ti.com/.../1610010
I also followed another post to find the device under Device Manager and re-installed software as specified in Section-3 of user guide of ADS1x9x Eval kit,
But still the device is not shown and ECG Recorder is not detected in Application. (I did not un-install the previous software, I just run the SW.exe file previously downloaded again).
