• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 457 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

GUI software error for DAC161S997EVM

sruthi uk
Prodigy 120 points
Other Parts Discussed in Thread: DAC161S997EVM, DAC161S997

Hi ,

After connecting the DAC161S997EVM to a USB port and the Loop supply voltage, i run the DAC161S997 Software.But same error shown below is coming when any of registers is set for getting desired DAC output current. What may be the reason for this??

with regards,

sruthy uk

  • 0
    TI__Genius 16890 points
    Hi Sruthy,

    This may be caused by not having NI-VISA installed on your system, or it may be conflicting with another VISA drive. Search for NI-VISA at the ni.com website and follow the instructions to install the driver.

    Mike