DLP3010EVM-LC: Pattern light sequence debugging GUI 2.2.0.5 Vs 3.2.0.6

Hi LP Kim,

Can you please clarify that you were using Edit Firmware Tool of the DLP GUI to generate the ,img file that included the pattern data file? or Did you use Light Control tab to display patterns? Are you using External Patten mode in this case?

We encourage the user to use the latest FW version and latest GUI version, but we can try to reproduce your issue on our end.

Regards,

Lori 

Dear Lori Wang 

Thank you for your reply. 

1. No include the pattern data using DLP GUI

2. External pattern mode between DLP3478 and our FPGA 

3.Now - FWSel_DLPC3478_DLPA2005_pm1_i2c0x36_v9p0p1.img  

  -. (Remark) FWSel_DLPC3478_DLPA2005_pm1_i2c0x36_v8p0p0.img - GUI2.2.0.5 OK , GUI 3.2.0.9 : Same issue 

   -. Zip File is included image file and bf file.

 231215_GUI2.2.0.5 Vs 3.2.0.6 using Edit Firmare .zip231215_TI_GUI Issue Check Check.pdf

Thanks 

Best & Regards 

LP Kim 

Hi LP Kim, 

Can you try using the GUI Advanced mode and sending the specific I2C commands in order (92h), (96h) and (05h) and let me know how the system behaves? 

Best,

Maximus

Hi LP Kim,

Do you still need support with this issue? If so please reply or open another ticket for other issues.

Best,

Maximus

Dear Maximus Rusi 

Sorry, I didn't test . After testing, I will updated the result.

Thank you for the update, I look forward to hearing back from you.