Texas Instruments (TI) DLP® support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search DLP® technology content or ask technical support questions on advanced light control algorithms, display, projection and automotive applications. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: DLPC3430 Other Parts Discussed in Thread: DLPDLC-GUI , DLP4710EVM-LC
Corrupted flash images can occur when a flash process through the GUI is interrupted or otherwise fails. An attempt to re-flash a DLP Pico EVM or system. The following process…
Other Parts Discussed in Thread: DLPDLCR3310EVM , DLPDLCR471TPEVM DLP Pico provides two different GUIs, a Display GUI and Light Control GUI , to flash firmware images onto an Evaluation Module (EVM).
Display GUI
For use when flashing EVM-specific firmware…
Part Number: DLPC1438
Clientele may find it difficult to properly format and send the incoming SPI data for CRC16 calculation on a DLPC143x system. Section 4.2 of the DLPC1438 Software Programmer's Guide discusses this procedure, however, we have…
Other Parts Discussed in Thread: DLP300S , DLP301S The DLP300S and DLP301S digital micromirror devices (DMDs) are digitally controlled micro-opto-electromechanical system (MOEMS) spatial light modulator (SLM). They are suggested for 3D printing applications…
Part Number: DLPDLCR230NPEVM
When developing with the DLPDLCR230NPEVM , the question may arise as to which host processor should be used. While multiple low end processor options can work for the 230NPEVM, Texas Instruments recommends a Raspberry Pi 4B…
Choosing between a Light Control or display chipset may be challenging for developers who are less acquainted with the DLP® portfolio. The pros and cons to be considered between these chipsets lies in the features offered by the DLP® controllers.…
Those to wish to update or re-flash the MSP430 code on a DLP® Light Control system may refer to the Pico MSP430-MCU Flash Quick Guide for assistance. Please feel free to open a new thread with any additional questions.
Regards,
Austin
Pico MSP430-MCU…
The clientele who have erased or flashed a corrupted image onto the EVM SPI flash devices may find the SPI Device Flash Via SOIC Clip Guide of use. Please open an new thread with any additional questions.
Kind regards,
Austin
SPI Device Flash Via SOIC…
Part Number: DLPC120-Q1 Other Parts Discussed in Thread: UNIFLASH
This FAQ page is intended to serve as a guide for users evaluating and developing AR HUD (Augmented Reality Heads Up Display) solutions.
DLPC120 Automotive Control Program User Guide
…
Part Number: DLPC230-Q1 Other Parts Discussed in Thread: DLP5530PROJQ1EVM , DLP5530PGUQ1EVM
[Page Under Construction]
This resource and documentations page is intended to serve as a guide for users evaluating and developing AR HUD (Augmented Reality Heads…