• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 163 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TUSB8043: EEPROM Programming Utility not detecting device

TUSB8043: Can't find TUSB8043 on EEPROM programmer tool

Gary Teng
Genius 5380 points
Part Number: TUSB8043

Hi sir,

 My customer want to use EEPROM programmer to setup their TUB804x but the GUI cant find TUSB804x device. Is there any driver (programming endpoint driver) we need for using the GUI? Thanks for your kindly help.

Best regards,

Gary Teng

  • 0
    TI__Guru 60865 points

    Hi Gary,

    The hub will automatically enter programming mode if it sees a blank EEPROM connected to its SDA/SCL lines after exiting reset and the pullups are installed on the SDA/SCL lines.  If the EEPROM is already programmed, you may need to force load the driver.  Please accept my friend request and I'll send you the instructions.

    Regards,

    JMMN