• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 338 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HD3SS3202: USB 3.2 Polarity Inversion

Daniels Kurgs
Prodigy 180 points
Part Number: HD3SS3202

Hello TI Team,

just a quick clarification. In the datasheet, page 10, the note states:

The HD3SS3202 can tolerate polarity inversions for all differential signals on Ports A, B, and C. Take
care to ensure the same polarity is maintained on Port A versus Ports B/C.

Does this mean that it is required to invert lane C0, if, for example B0 is already inverted? Or that B1 needs to be inverted if B0 is inverted?

In general, I do not understand this note in context with USB3 - wouldn't the host and device determine the correct lane polarities during link training, regardless if the other is swapped or not?

Thanks!

Daniels

  • +1
    TI__Guru**** 153421 points

    Daniels

    Port A selects between Port B and Port C, so polarity needs to be maintained between Port A and Port B/C. 

    You are right that USB Hosts and devices, if compliant, can resolve the polarity swap. The note is intended for non-compliant USB host/device or other interfaces that do not support polarity swapping.

    Thanks

    David