Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 208 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN75LVCP601: SN75LVCP601 eye diagram

switch
Genius 3110 points
Part Number: SN75LVCP601

Hi Ti Team，

I have a project that uses SN75LVCP601, and the test eye diagram is very poor. Is there any improvement measure? 

  • 0
    TI__Guru* 93670 points

    Hi Zan,

    I am assuming you have 100-ohm differential input and output. Did you sweep EQ settings per table 1 of the data sheet? It seems there is a lot of ISI left. Can you please capture eye diagrams with different EQ settings.

    Regards ,, Nasser