• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 272 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS110DF1610: Hitless Mux/demux

user3660867
Prodigy 220 points
Part Number: DS110DF1610
Other Parts Discussed in Thread: DS110DF410

Hi,

We want to use DS110DF1610 in line cards oof communication equipment.
but some question hope you can answer:
what is the maxim latency variation？
what is the switch time when switching an outpot from one input to another?

thanks a lot!

Fang Youxiang

  • 0
    TI__Mastermind 21462 points

    Hi Fang,

    user3660867 said:
    what is the maxim latency variation？

    I don't see any specific data we have regarding this, but from the following information in the datasheet, variation should be <80ps + device jitter.

    user3660867 said:
    what is the switch time when switching an outpot from one input to another?

    The time it takes the device cross point to switch is very low, on the order of tens of microseconds.  However, since the cross point is located before CDR in this device, CDR needs to re-lock to the signal.  The lock time is not included in the DS110DF1610 datasheet, but is comparable to that of the DS110DF410.  Please find an excerpt from the DS110DF410 datasheet below.

    Thanks,
    Drew

  • 0 in reply to Drew Miller1
    Prodigy 220 points

    Hi Drew,

    Thanks for your reply and patient explanation. and the data attached in your reply is useful for us.

    Fang Youxiang