DS25BR101: IBIS model with equalization and Pre-emphasis

ttd

Part Number: DS25BR101
Other Parts Discussed in Thread: DS25BR204, DS25BR440, DS25BR120

Dear Technical Support Team,

Could you send me a simulation model (IBIS) with equalization and pre-emphasis?
I'd like to use a model with Pre-Emphasis at least. This is because attenuation correction cannot be performed unless Pre-Emphasis is set.

Best Regards,

ttd

over 2 years ago

0 Nasser Mohammadi over 2 years ago

TI__Guru* 91440 points

Greetings,

Please attached note IBIS file for this device. However, this model does not simulate CTLE or DEM - this is all we have.

Regards ,, Nasser1581.ds25br101.ibs

0 ttd over 2 years ago in reply to Nasser Mohammadi

Mastermind 7780 points

Hi Nasser,

Thank you for your reply.

If you have ibis model to simulate CTLE or DEM with other device(similar function of DS25BR101),could you introduce it?

Best Regards,

ttd

0 Nasser Mohammadi over 2 years ago in reply to ttd

TI__Guru* 91440 points

Greetings,

We have IBIS-AMI model for DS25CP104. This model can be used for other similar products such as DS25BR102, DS25BR440, and DS25BR204. If you are interested, please send me a friend request along with your email address so we can send this to you.

Regards,, Nasser

0 ttd over 2 years ago in reply to Nasser Mohammadi

Mastermind 7780 points

Hi Nasser,

Thank you for sending IBIS-AMI model.

Is DS25BR102 typo? I hit DS25BR120 on TI web.

Regards,

ttd

0 Nasser Mohammadi over 2 years ago in reply to ttd

TI__Guru* 91440 points

Greetings,

Yes it should be DS25BR120 instead.

Thanks ,, Nasser

Interface

Interface forum

DS25BR101: IBIS model with equalization and Pre-emphasis