LM8330: Slave Address

Michael Lamontagne

Prodigy 90 points

Part Number: LM8330

What is the slave address for the LM8330? Datasheet shows the 7-bit as 0x88.

This does not make sense for a 7-bit address.

please clarify.

over 2 years ago

0 Danny Bacic over 2 years ago

TI__Mastermind 25125 points

Michael,

Thanks for reaching out. You are correct that 0x88 is 8-bit. This appears to be a typo in this data sheet. I've noted it and we will look to getting it fixed when the data sheet is updated.

Based on the user guide for the LM8330EVM, it looks like the actual 7-bit address is 0x44, or 1000100₂. If you'd like to check, I found this beginning at Figure 3-3 in the user guide.

Best,

Danny

0 Michael Lamontagne over 2 years ago in reply to Danny Bacic

Prodigy 90 points

Still a bit unclear ... 0x44 would be 100 0100 hex.

Are you saying the READ address would be 100 0100 (1) and the WRITE address would be 100 0100 (0) with the R/W bit included?

Thanks for the assistance.

0 Danny Bacic over 2 years ago in reply to Michael Lamontagne

TI__Mastermind 25125 points

Michael,

Yes, the 7-bit address would be 1000100₂ (binary) or 0x44 (hexadecimal). The R/W bit follows this 7-bit address.

(1)

1000100

(7)

R/W

(1)

ACK

(1)

Best,

Danny

Interface

Interface forum

LM8330: Slave Address