Hello,
Could you please like to review my design schematic of DS90UB962-Q1? Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Could you please like to review my design schematic of DS90UB962-Q1? Thanks.
Hello,
Please allow till the end of next week for me to complete my review.
Regards,
Nick
Hi,
My comments are below:
1. VDDL, VDD_FPD, and VDD_CSI are recommended to have a 10uF, 1uF, and 2x0.01uF caps.
2. IDX divider doesn't quite match but I think it should be fine.
3. Pin 4 should be tied to ground
Regards,
Nick