LMH0346: Acquisition time and latency

Iris Metzner

Part Number: LMH0346

Hello,

1. An acquisition time of 15 ms is specified in the data sheet. That's long. Is this time the same in any rate select mode (auto-rate or fixed rate)?

2.Can you provide information on the latency times of the LMH0346?

Best regards

Iris

0 Nasser Mohammadi over 2 years ago

Hi Iris,

1). This is for auto rate selection. If it is a fixed rate then lock time is much faster - in order of 3-4ms.

2). Latency is 1.5UI. One UI is the bit time. FOr example, at 2.97G data rate, one UI is about 337ps. So the delay is 1.5 X 337 ~ 500ps.

Regards,Nasser

Interface forum