Other Parts Discussed in Thread: TCAN330, TCAN334
Hi experts,
Could the pin5 and pin8 of TCAN330/2/4/7 be tied to GND?
BR,
Gordon
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Gordon,
Clemens is correct, though grounding the pins will change the function of the device depending on the part number. On TCAN330 and TCAN334, the state of the device changes depending on the logic state of pins 5 and 8.
Regards,
Eric Hackett