*Can the ONET4201 turn on the LD by inputting the following pulse signal to DIN+?
*Is there an evaluation board for ONET4201?
*Laser driver_20230405.pdfIs there any other TI IC that can control the LD?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
*Can the ONET4201 turn on the LD by inputting the following pulse signal to DIN+?
*Is there an evaluation board for ONET4201?
*Laser driver_20230405.pdfIs there any other TI IC that can control the LD?
Greetings,
ONET4201 or other laser drivers are target for a muchhigher data rate. Typically minimum data rate could be 150Mbps. 1ms or 1Hz rate is not supported.
Perhaps LED driver may be applicable for this design. Please below note TI LED drivers:
https://www.ti.com/power-management/led-drivers/overview.html
Regards,Nasser