TPD4S014: Regarding measurement conditions

Daisuke Higa

Part Number: TPD4S014

Hi sypport team.

Please tell me the measurement conditions (environment temperature, measurement circuit, etc.) for the following data in the datasheet P9.
Figure 8. Start Up Inrush Current Characteristics

Best regards,

Higa

over 1 year ago

0 Kuno Wu over 1 year ago

TI__Mastermind 18556 points

Hi Higa-san,

Greeting!

The measurement circuit should use the EVM, just like below show, and the environment temperature should be 25s℃, and the Vbus is mean the VBUS pin(9,10), and VCC is mean the VBUSOUT pin(1, 2), and the Iinrush is mean the input inrush current, thank you.

Best Regards,

Kuno

0 Daisuke Higa over 1 year ago in reply to Kuno Wu

Genius 3655 points

Hi Kuno-san

Thank you very much for your quickly response.

Regards,

Higa

+1 Kuno Wu over 1 year ago in reply to Daisuke Higa

TI__Mastermind 18556 points

Hi Higa-san,

You are welcome, feel free to submit a new thread if you have other questions, thank you.

Best Regards,

Kuno

Interface

Interface forum

TPD4S014: Regarding measurement conditions